Clicky

The most important highlights at a glance

F 900 Tilting Shaper – for top performance

The Felder 900 Series shapers were designed to offer exceptional performance under the most demanding conditions. The ­inner workings of the machine have been elegantly designed and incorporate the finest machining. The extremely precise construction and user friendly operation produce a perfectly machined workpiece. These features have made Felder woodworking machines a best seller worldwide.

… with “Power-Drive” its all electronic
A turn of a knob for both spindle height and angle settings. Fine adjustments to .004” are made at the push of a button. LED displays will show actual ­settings to .004” and one tenth of a degree respectively.
 

... Your decision for Felder, a risk-free decision

  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience - already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support
  • CE + GS dust certified

Details & Accessories

Equipment & Technical data

Electrics
002
3x 230 V motor voltage
Standard equipment
005
60 Hz
Standard equipment
008
10.0 HP (7.35 kW)*
Standard equipment
009
13.5 HP (10.0 kW)*
Optional
5 positions at 3500/4500/6000/8000/10,000 rpm
Standard equipment
10
Star-delta start, required for 7.5 HP
Standard equipment
17
Variable speed control 1500–10,000 rpm with soft-start for 3x 400 V or 3x 230 V, only with 10.0 HP (7.35 kW), (instead of star-delta start) (#110)
Optional
Switch for forward and reverse run
Standard equipment
12
Trigger switch for dust extractor start
Optional
14
3-phase EURO-plug for extractor/power feed with delayed start
Optional
29
Electrical equipment according to CSA rules
Optional
Shaper Unit and Shaper Fence
Opening of spindle moulder table
320
118
Electric spindle height adjustment with LED display
Standard equipment
109
Manual spindle tilt 90°–45°
Standard equipment
110
Electric spindle tilt 90–45°
Optional
119
Digital LED display for spindle angle adjustment (#110)
Optional
120
Manual spindle locking mechanism
Standard equipment
121
Spindle locking from outside
Optional
126
Preparation for tenoning hood (tooling dia. max. 13¾” (350 mm)) with speed limitation according to CE-regulations
Optional
103
Shaper spindle Ø 30 mm, usable height 5½” (140 mm)
Optional
107
Shaper spindle Ø 32 mm, usable height 5½” (140 mm)
Optional
106
Shaper spindle Ø 35 mm, usable height 5½” (140 mm)
Optional
105
Shaper spindle Ø 1¼”, usable height 5½” (140 mm)
Standard equipment
101
Shaper spindle Ø 40 mm, usable height 6¼” (160 mm)
Optional equipment at no extra cost
102
Shaper spindle Ø 50 mm, usable height 6¼” (160 mm)
Optional
108
High speed router spindle 15,000 rpm instead of 1¼” spindle
Optional
127
Setup for digital revelolution display for high speed router (#108)
Optional equipment at no extra cost
112
Shaper fence “230” for max. tooling diameter 9” (230 mm), fence plates 21⅝” (550 mm)
Standard equipment
123
EURO-shaper guard
Standard equipment
113
MULTI adjustment for spindle fence “230” (#112)
Standard equipment
116
Aluminum Shaper fence plates anodised 21½” (550 mm)
Standard equipment
117
Shaper fence plate anodized with “safety bar guides” (#112)
Optional
125
Safety fence plates “Integral” 19⅝” (500 mm)
Optional
Sliding Tables
137
Tenoning table 51” (1300 mm) anodized
Standard equipment
138
Tenoning table 81” (2050 mm) anodized
Optional
133
Tenoning table 98⅜” (2500 mm) anodized
Optional
Outrigger Table and Crosscut Fence
159
43” (1100 mm) Outrigger table for 51”–81” (1300–2050 mm) sliding tables
Optional
160
Outrigger table 1300 for sliding tables 51”–98” (1300–2050 mm)
Optional
164
Crosscut fence 43” (1100 mm) for all sliding tables
Optional
164Y
Metric scale for crosscut fence
Optional equipment at no extra cost
165
Telescopic extension for crosscut fence to 78” (2000 mm) (#164)
Optional
166
Crosscut fence 102” (2600 mm) for outrigger table (#159)
Optional
General
Working height in inches
35
Min. transport width in inch (without option 012)
36¼
Extractor connection port diameter in mm on shaper fence/below the table dust port
120/80
Weight, lbs (with average equipment)
1430
Important Accessories
212
Swing away bracket for a power feeder
Optional
210
Coupling system for table extension, spindle (Set with 2 pcs)
Optional
211
Tenoning hood (tooling dia. max. 10⅝”/13¾” (270/350 mm)) with tenoning plate (#126)
Optional
209
Tennoning Plate
Optional
223
IPPC
Standard equipment
Transport
221
Preparation for container
Standard equipment

Free catalog

We will be more than happy to help!